Maytag Washer Fault Codes – Quick Troubleshoot Guide (2024)

Welcome to our comprehensive guide on Maytag washer fault codes. If you’re experiencing issues with your Maytag front load washer, these error codes can provide valuable insights into the problem at hand. By understanding what each code means and following the recommended solutions, you can quickly diagnose and address common issues, saving both time and money.

Key Takeaways:

  • Maytag washer fault codes can help you troubleshoot and solve common issues with your washing machine.
  • If you encounter an error code, consult your owner’s manual for specific instructions on resolving the issue.
  • Some common error codes include LOC or LC, dET, Int, rL or F34, Sud or Sd, F5 E2, F7 E1, F8 E1 or LO FL, F8 E2, and F9 E1.
  • Always check for simple solutions first, such as ensuring proper detergent usage, clearing obstructions, or checking water supply.
  • If the error persists or you need additional assistance, don’t hesitate to reach out to our professional team for expert help.

LOC or LC Error Codes

Maytag Washer Fault Codes – Quick Troubleshoot Guide (1)

If you see the LOC or LC error code on your Maytag washer, it means that the Control Lock feature has been activated. This feature is designed to prevent accidental changes to the settings during a cycle. It can be quite frustrating when you’re unable to operate your washer.

To resolve this issue:

  1. First, try touching the Control Lock button to disable it. Look for the button with the Control Lock icon on your washer’s control panel and press it for a few seconds.
  2. If that doesn’t work, consult your Owner’s Manual to identify the specific button that activates the control lock for your model. The button may have a label such as “Control Lock,” “Hold 3 Sec,” or similar.
  3. Once you locate the correct button, follow the instructions in the manual to deactivate the control lock.

After deactivating the control lock, your Maytag washer should return to normal operation, allowing you to start a new cycle or make adjustments as needed. If you’re still experiencing issues or need further assistance, don’t hesitate to reach out to us.

Error CodeDescriptionSolution
LOC or LCControl Lock activatedTouch Control Lock button or consult Owner’s Manual to deactivate

Dealing with error codes can be frustrating, but understanding their meaning and knowing how to troubleshoot them can save time and money. In the next section, we’ll explore the dET error code that may appear on some Maytag washer models.

dET Error Code

Maytag Washer Fault Codes – Quick Troubleshoot Guide (2)

The dET error code is specific to select models and indicates that the detergent cartridge is not detected in the dispenser. However, if you are using single-load doses of detergent, you can safely ignore this message. To resolve the dET error code, make sure that the dispenser cartridge is inserted correctly and securely in the dispenser drawer. Ensure that the dispenser drawer is fully shut so that it can detect the presence of the detergent cartridge.

If you continue to experience the dET error code even after confirming proper cartridge insertion and drawer closure, it may indicate a malfunction in the dispenser system. In such cases, it is advisable to contact our customer support for further assistance and professional guidance.

Common Troubleshooting Steps for dET Error Code:

  1. Ensure that you are using the appropriate detergent cartridge for your Maytag washer model.
  2. Check the dispenser drawer for any obstructions or debris that may prevent the proper detection of the detergent cartridge.
  3. Inspect the dispenser cartridge for any signs of damage or wear. Replace it if necessary.
  4. Carefully follow the instructions in your Maytag washer’s owner’s manual regarding the correct insertion of the detergent cartridge and closure of the dispenser drawer.
Error CodeDescriptionTroubleshooting Steps
dETThe detergent cartridge is not detected in the dispenser.
  • Ensure proper cartridge insertion.
  • Confirm the dispenser drawer is fully shut.
  • Contact customer support if the issue persists.

Int Error Code

Maytag Washer Fault Codes – Quick Troubleshoot Guide (3)

The Int error code is a common issue that may occur with your Maytag washer. This code indicates that the cycle was paused or cancelled. It is important to note that the washer may continue spinning and draining for a short period before displaying this error code. Don’t worry, though, as there are simple steps you can take to resolve this problem.

To remove the Int error code, follow these instructions:

  1. Press the pause or cancel button on your washer twice.
  2. Press the power button once.

By pressing the pause or cancel button twice and the power button once, you can clear the error code and potentially resume normal operation of your washer.

If, after following these steps, the Int error code persists, there is another troubleshooting method you can try. Simply unplug the washer from the power source or disconnect the power for one minute. This can help reset the system and clear the error code.

Remember, if you continue to experience the Int error code or any other issues with your Maytag washer, don’t hesitate to contact us for professional assistance. Our team is here to help you resolve any problems and get your washing machine back up and running smoothly.

See also Top Loader Filter Location Guide | Washing Machine

rL or F34 Error Codes

Maytag Washer Fault Codes – Quick Troubleshoot Guide (4)

If you encounter the rL or F34 error codes while running the Clean Washer cycle on your Maytag washer, it signifies that items have been detected inside the drum. This error code is prompted as a safety measure to prevent the washer from operating with foreign objects present, which can cause damage to the machine or affect its performance.

To resolve this issue and ensure optimal functioning of your Maytag washer, follow these steps:

  1. Remove any items from the drum that may have inadvertently found their way inside the washer.
  2. Inspect the drum thoroughly to ensure no small objects are left behind.
  3. Once the drum is clear, restart the Clean Washer cycle to resume normal operation.

If the rL or F34 error codes persist even after removing all items from the drum, it is recommended to contact a professional service technician or Maytag customer support for further assistance.

Note: It is essential to address this issue promptly to avoid potential damage and ensure optimal performance of your Maytag washer.

Preventing Items from Entering the Drum:

To prevent items from accidentally entering the drum, consider following these preventive measures:

  • Check pockets before loading clothes into the washer.
  • Avoid washing items with large buttons, zippers, or other detachable parts that might come loose during the wash cycle.
  • Secure garments with loose strings or straps to prevent them from becoming entangled in the drum.

Your Maytag washer is designed to deliver exceptional performance and reliability. By adhering to these guidelines, you can maintain the longevity of your appliance and enjoy hassle-free laundry experiences.

Error CodeDescriptionSolution
rL or F34Items detected in the washer during Clean Washer cycle
  1. Remove items from the drum
  2. Restart Clean Washer cycle

Sud or Sd Error Codes

Maytag Washer Fault Codes – Quick Troubleshoot Guide (5)

The Sud or Sd error codes indicate that there are too many suds in the washing machine. Excessive suds can prevent the washer from spinning out water effectively, leading to poor cleaning results and potential damage to the machine. Fortunately, Maytag washers are equipped with features to address this issue.

When the Sud or Sd error code is triggered, the washer will automatically extend the rinse time to remove the excess suds. This allows the detergent to be thoroughly rinsed out of the clothes, ensuring a clean and fresh result. However, it is important to identify and resolve the underlying cause of the excess suds to prevent the error code from recurring.

To prevent excess suds and avoid the Sud or Sd error code, follow these steps:

  1. Use HE or High Efficiency detergent specifically designed for front load washers. These detergents are formulated to produce fewer suds, maintaining optimal machine performance.
  2. Avoid using “no splash” or “easy pour” liquid chlorine bleach, as they can cause excessive suds. Stick to HE or High Efficiency bleach alternatives.
  3. Check for a restricted drain hose or standpipe. A clogged drain hose can result in water backup, leading to excessive suds. Ensure that the drain hose is free from any obstructions and properly connected.

If the above measures do not resolve the issue, consider the following:

  • Inspect the machine for any leaks that may be causing water to enter the detergent area, leading to excess suds.
  • Clean the washer periodically to remove any detergent residue that may accumulate over time. This helps prevent the buildup of excess suds and ensures optimal machine performance.

By following these guidelines, you can prevent the Sud or Sd error codes and maintain the optimal performance of your Maytag washer.

Common Causes and Solutions for Sud or Sd Error Codes

CausesSolutions
Using too much detergentFollow the manufacturer’s instructions on the detergent packaging and use the recommended amount for your load size.
Using non-HE or regular detergentSwitch to HE or High Efficiency detergent designed for front load washers.
Using “no splash” or “easy pour” liquid chlorine bleachUse HE or High Efficiency bleach alternatives.
Restricted drain hose or standpipeEnsure the drain hose is free from obstructions and properly connected.
Machine leaksCheck for leaks and repair them to prevent water from entering the detergent area.
Detergent residue buildupClean the washer regularly to remove detergent residue and maintain optimal performance.

F5 E2 Error Code

The F5 E2 error code on your Maytag washer indicates that the door is not locking properly. This can prevent the washer from starting or completing a cycle. To resolve this issue, follow these steps:

  1. First, check for any items that may be blocking the door. Clear away any obstructions and ensure that the door is free to close without any interference.
  2. Next, make sure that the door is closing completely. Sometimes, the door may not be fully latched, causing the lock to fail. Gently press the door closed to ensure a secure fit.
  3. If the issue persists, try resetting the washer by pressing the pause or cancel button twice and the power button once. This may clear any temporary glitches that are preventing the door from locking.

If these steps do not resolve the problem, it may be necessary to consult the owner’s manual or contact a professional technician for further assistance.

See also Can Pipes Burst in Warm Weather? Know the Risks

The image above illustrates the F5 E2 error code on a Maytag washer, indicating a door locking issue.

F7 E1 Error Code

The F7 E1 error code on your Maytag washer indicates a motor speed sensing error. This error code can occur due to various reasons, but there are a few troubleshooting steps you can take to address the issue.

  1. Check that all the shipping bolts have been removed from the washer. Shipping bolts are usually installed to secure the drum during transportation. If they are not removed, they can cause imbalance and trigger the F7 E1 error code. Refer to your owner’s manual for instructions on how to remove the shipping bolts, if necessary.
  2. Ensure that the washer has not been overloaded. Overloading the washer can strain the motor and lead to motor speed sensing errors. Make sure to follow the recommended load capacity for your specific Maytag washer model.
  3. Press the pause or cancel button twice and then press the power button once to clear the error code. This may reset the washer’s control system and resolve the issue.

If the F7 E1 error code persists even after following these steps, it is recommended to seek professional assistance. Contact our customer support team or schedule a service appointment to get expert help in diagnosing and resolving the motor speed sensing error on your Maytag washer.

Troubleshooting Tips:

Always make sure to disconnect the washer from the power source before attempting any troubleshooting or repairs. Safety should be a top priority.

F8 E1 or LO FL Error Code

The F8 E1 or LO FL error code on your Maytag washer indicates a low flow of water. This error code can be caused by various issues with the water supply or the inlet hoses.

To resolve the F8 E1 or LO FL error code, follow these troubleshooting steps:

  1. Check the water supply: Ensure that both the hot and cold water faucets are turned on and have sufficient water pressure.
  2. Inspect the inlet hoses: Make sure that the inlet hoses are not kinked, bent, or clogged. Clear any blockages and straighten the hoses if necessary.
  3. Press pause or cancel: Press the pause or cancel button twice to clear the error code from the display.
  4. Press power button: Press the power button once to reset the washer.

If the F8 E1 or LO FL error code persists after performing these steps, it may indicate a more serious problem with the water supply or the washer’s internal components. In such cases, it is recommended to seek professional assistance or contact Maytag customer support.

Here’s a helpful table summarizing the troubleshooting steps:

StepsDescription
1Check the water supply
2Inspect the inlet hoses
3Press pause or cancel
4Press power button

F8 E2 Error Code

If you encounter the F8 E2 error code on your Maytag washer, it suggests a problem with the dispenser system. This error is applicable to select models. To resolve this issue, follow the steps below:

  1. First, verify that the detergent drawer or detergent cartridge is not clogged with detergent residue. If it is, clean it thoroughly.
  2. If cleaning the dispenser system doesn’t resolve the issue, you can try resetting the washer. Turn off the power to the washer for a few minutes, and then turn it back on.
  3. If the error code persists, it may indicate a malfunctioning dispenser system component. In such cases, it is best to contact a professional technician for further assistance and repair.

It’s important to address the F8 E2 error code promptly to ensure proper functioning of your Maytag washer. Proper maintenance and occasional cleaning of the dispenser system can help prevent this error and keep your washer running smoothly.

If you need professional assistance in resolving the F8 E2 error code on your Maytag washer, don’t hesitate to reach out to our team for expert support.

Troubleshooting Tips:

Regularly cleaning the dispenser system of your Maytag washer can prevent clogs and ensure optimal performance.

Use high-quality detergents that dissolve easily to minimize potential clogs in the dispenser system.

Refer to your Maytag washer’s owner’s manual for detailed instructions on cleaning the dispenser system.

F8 E2 Error Code Troubleshooting Checklist:

StepsDescription
1Check for detergent clogs in the dispenser system
2Reset the washer by turning off the power
3Contact a professional technician if the error persists

F9 E1 Error Code

The F9 E1 error code is a common issue that Maytag washer owners encounter. This code typically appears when the drain times are longer than expected, indicating a problem with the drainage system. Understanding the possible causes and solutions can help you resolve this error code quickly and efficiently.

Possible Causes of F9 E1 Error Code

  • Blocked or clogged drain hose
  • Improperly installed drain hose
  • Excessive suds

Solutions to Resolve F9 E1 Error Code

To fix the F9 E1 error code on your Maytag washer, follow these steps:

  1. Check the drain hose for any kinks or clogs. Clear any obstructions that may be restricting proper drainage.
  2. Ensure that the drain hose is properly installed. It should be positioned at a height of at least 39 inches from the floor to prevent water from flowing back into the tub.
  3. Excessive suds can also impede proper draining. Make sure you are using high-efficiency (HE) detergent specifically designed for front load washers.
See also Uncover Costs: How Much is a Miele Refrigerator Today?

If you have followed these troubleshooting steps and the F9 E1 error code persists, it is recommended to contact a professional technician or Maytag customer support for further assistance.

IssuePossible CauseSolution
F9 E1 Error CodeBlocked or clogged drain hoseCheck and clear any obstructions in the drain hose
Improperly installed drain hoseEnsure the drain hose is properly installed and positioned
Excessive sudsUse high-efficiency (HE) detergent to prevent excessive suds

Resolving the F9 E1 error code promptly will ensure that your Maytag washer functions optimally, allowing you to complete your laundry tasks without any interruptions.

Conclusion

Maytag washer fault codes provide a valuable tool for troubleshooting and resolving common issues with your Maytag washing machine. By familiarizing yourself with these error codes and following the suggested solutions, you can quickly identify and fix problems, saving time and money. Understanding the meaning behind each code allows you to address specific malfunctions effectively.

Whether you encounter the LOC or LC error codes indicating a control lock activation, the dET error code related to the detergent cartridge, or the rL or F34 error codes signaling items in the washer during the Clean Washer cycle, knowing how to troubleshoot these problems empowers you to maintain your machine’s performance.

If you still need assistance after attempting the recommended solutions, don’t hesitate to reach out for professional help. Our team of experts is here to provide guidance and support to ensure your Maytag washer operates at its best. Remember, resolving issues promptly can prolong the lifespan of your appliance and ensure efficient laundry cycles in the long run.

FAQ

What does the LOC or LC error code on my Maytag washer mean?

The LOC or LC error code indicates that the Control Lock has been activated. You can touch the Control Lock button or consult your Owner’s Manual to deactivate it.

Why am I getting a dET error code on my Maytag washer?

The dET error code appears when the detergent cartridge is not detected in the dispenser. If you are using single-load doses of detergent, you can ignore this message. Ensure that the dispenser cartridge is inserted correctly and the dispenser drawer is fully shut.

What does the Int error code mean on my Maytag washer?

The Int error code indicates that the cycle was paused or cancelled. To remove the code, press the pause or cancel button twice and the power button once. If the code persists, unplug the washer or disconnect the power for one minute.

Why am I seeing the rL or F34 error code on my Maytag washer?

The rL or F34 error codes signify that items were detected in the washer during the Clean Washer cycle. Remove any items from the drum and restart the Clean Washer cycle to resolve this issue.

What does the Sud or Sd error code mean on my Maytag washer?

The Sud or Sd error codes indicate that there are too many suds in the washing machine. Make sure to use HE or High Efficiency detergent and check for a restricted drain hose or standpipe that may be causing the issue.

How can I fix the F5 E2 error code on my Maytag washer?

The F5 E2 error code suggests a problem with the door not locking properly. Check for any items blocking the door and ensure that it is closing completely. Press the pause or cancel button twice and the power button once to clear the code.

What should I do if my Maytag washer displays the F7 E1 error code?

The F7 E1 error code indicates a motor speed sensing error. Check that all the shipping bolts have been removed from the washer and that it has not been overloaded. Press the pause or cancel button twice and the power button once to clear the code.

Why is my Maytag washer showing the F8 E1 or LO FL error code?

The F8 E1 or LO FL error code indicates that the washer is sensing a low flow of water. Check the water supply to ensure both hot and cold water faucets are turned on and that the inlet hoses are not kinked or clogged. Press the pause or cancel button twice and the power button once to clear the code.

What does the F8 E2 error code mean on select Maytag washer models?

The F8 E2 error code suggests a problem with the dispenser system. Verify that the detergent drawer or cartridge is not clogged with detergent and clean the dispenser system if necessary.

How can I resolve the F9 E1 error code on my Maytag washer?

The F9 E1 error code indicates that drain times are longer than expected. Check the drain hose for kinks or clogs and ensure it is properly installed. Make sure you are using HE detergent to avoid excessive suds.

Source Links

Maytag Washer Fault Codes – Quick Troubleshoot Guide (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Frankie Dare

Last Updated:

Views: 5971

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Frankie Dare

Birthday: 2000-01-27

Address: Suite 313 45115 Caridad Freeway, Port Barabaraville, MS 66713

Phone: +3769542039359

Job: Sales Manager

Hobby: Baton twirling, Stand-up comedy, Leather crafting, Rugby, tabletop games, Jigsaw puzzles, Air sports

Introduction: My name is Frankie Dare, I am a funny, beautiful, proud, fair, pleasant, cheerful, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.